Leno Selling SS304 316 Sanitary CIP Return Self-Primng Pump

• After-sales Service: Online Service
• Warranty: One Year
• Type: Self-priming Pump With Outer Recirculation
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LNP-10T
• Air Engine Type: Fitted Motor
• Theory: Water Ring Type
• Transmission: Direct Connection Transmission
• Structure: The Slide
• Material: Stainless Steel 304 / SUS316L
• Usage: CIP System
• Speed: 1450rpm/1750rpm
• Power(W): 3.0kw-11kw
• Voltage: 220V 380V 440V
• Temperature: 0-150celsius Degree
• Connection: Tri-Clamp,Union,Flange
• Suction: 6meter
• Sealing Type: Silicon,EPDM
• Transport Package: Plywood Case
• Specification: 500-30000L/H
• Trademark: LENO
• Origin: China
• HS Code: 8413709990
• Production Capacity: 100 Set/Month
• Package Size: 60.00cm * 40.00cm * 50.00cm
• Package Gross Weight: 85.000kg
• Lead Time: 30 days (1 - 1 Sets) ; To be negotiated ( > 1 Sets)

Product Description

A CIP (Clean-In-Place) return pump is an essential component of a CIP system used in industries such as food and beverage, pharmaceuticals, and dairy processing. Its primary function is to recirculate the cleaning solution during the CIP process. Here's an overview of the working process of a CIP return pump:
1.Cleaning Solution Supply: A CIP system typically includes a storage tank or a central supply system that holds the cleaning solution. The cleaning solution consists of water, detergent, and possibly sanitizing agents depending on the cleaning requirements.
2.Pump Priming: Before starting the CIP process, the pump needs to be primed to ensure the pump and associated piping are filled with the cleaning solution. Priming can be achieved manually or by using priming mechanisms like a self-priming pump design.

3.Pump Activation: Once the cleaning solution is ready, the CIP return pump is activated. It can be started manually or automatically depending on the system setup.
4.Suction and Discharge Connections: The CIP return pump is connected to the CIP return line, which is the dedicated line
through which the cleaning solution is recirculated. The pump has a suction connection that draws the solution from the CIP return line, and a discharge connection that returns the solution back into the cleaning circuit.
5.Recirculation of Cleaning Solution: The pump creates a flow in the CIP return line, pulling the cleaning solution from the return line and discharging it back into the cleaning circuit. This recirculation process helps distribute the cleaning solution throughout the equipment or piping being cleaned.
6.Flow Control: The flow rate of the CIP return pump can be controlled manually or automatically using valves or flow control devices. Flow control ensures the proper circulation of the cleaning solution at the desired rate to achieve effective cleaning.
7.Pressure and Velocity: The CIP return pump generates the necessary pressure and velocity to ensure the cleaning solution reaches all the surfaces to be cleaned. This helps remove soil, debris, and microorganisms from the equipment or piping.
8.Circulation Time: The duration of the recirculation process depends on the specific CIP procedure and the cleaning requirements. The cleaning solution is typically circulated for a defined period to achieve thorough cleaning and sanitization.
9.Drainage: Once the cleaning process is complete, the cleaning solution is drained from the system. The CIP return pump may be used to assist in draining the solution, depending on the system design.
10.Rinse and Sanitization: After the cleaning solution is drained, the CIP system may include additional steps for rinsing and sanitizing the equipment or piping. These steps may involve separate pumps or may be integrated into the CIP return pump system.

Products Description 

material	SS304 or SS316L
Capacity	0-40T (Customized)
Pressure	0-4bar
Flow Viscosity	1-50pas
Suction	6M
temperature	0-140 celsius degree
mechnical seal type	Sinlge mechanical seal		Double flushed mechanical seal
connection type	Clamp	Union	Flange
motor type	Normal	Ex-Proof	inverter
motor cover	Round/Square
Speed	1450RPM/1750RPM

Model	B(mm)	C(mm)	D(mm)	M(mm)	F(mm)	G(mm)	H(mm)	L(mm)	W(mm)
LNP-7-15S	71	230	142	233	300	160	430	652	260
LNP-10-20S	71	230	142	233	300	160	430	652	260
LNP-20-20S	83.5	242	185	254	300	190	454	642	280
LNP-30-36S	83.5	274	185	282	330	216	492	772	310

Model	Max FLOW(T/H)	Max Lift(M)	Suction(M)	Speed(RPM)	Motor(KW)
LNP-7-15S	7	15	6M	1450/1750	2.2
LNP-10-20S	10	20	6M	1450/1750	3
LNP-20-20S	20	20	6M	1450/1750	4
LNP-30-36S	30	36	6M	1450/1750	7.5
We can customize the equipment according to customers' requirment.

Product Image

Recommend Related Products

Company Profile

Logistics information
FAQ

Q1	Are you trade or manufacturer?
A	We are a factory with an international sales company specialized in support for global distributors.
Q2	Can you provide instant technical consulting services?
A	We are able to discuss technical details and offer suggestions over the phone in English. You can get the answers in minutes, instead of days.
Q3	What's the difference between Ready-To-Ship and Customized products?
A	Some of RTS standard products are in stock and ready to ship in 2-3 days. We can also quick design and make the drawings for customer requirements, then begin the production.
Q4	What is the payment terms?
A	We accept Alibaba Trade Assurance Order, also can T/T and L/C.
Q5	How to choose the shipment way?
A	It is according to the order quantity, delivery time, costs and customs policy etc. (Or decide by customers)
Q6	How about the after-sales service?
A	Fast after-sales support. Our products have a one-year warranty and free permanent consulting services.